The TC10B can be used both as circulator and bath. The bath fluid is heated by a micro­processor controlled heating element. When working below ambient tem­perature cooling fluid can be circulated through the cooling coil to lower the bath temperature.

The bath has a fluid level-detector. The microprocessor controlled heater with autotune function guarantees precise temperature control. 

The bath is conform CE regulation. It's equipped with multiple safety features in order to guarantee safe around the clock operation. A mechanical safety thermostat protects the bath against high temperatures and will automatically reset itself after switching the bath off and on again. The safety thermostat can be set between ambient and +300°C. In case of overtemperature electronics and motor will be switched off. The pump motor is protected from mechanical overload via a resettable fuse.

The bath temperature can be set to a maximum of +200°C (392°F) in steps of 0.1 degree. The overal system accuracy is 0.03K.

A pump circulates the bath content or provides external circulation. The pump pressure is 300 mBar and maximum flow is 7.5 litres per minute without counterpressure.

 Available in 230V/50-60Hz and 115V/60Hz.